Tipmaster
Tipmaster Tipmaster
Tipmaster
Tipmaster Tipmaster Tipmaster
 
Waste Management Tippers, Any Junk Tippers, Rubbish Clearance Tippers, House Clearance Tippers
Image

This is an example of a Tipmaster waste management specification tipper built for a junk removal company on an Iveco 6500 GVW 3750mm wheel based chassis cab.

An Aluminium storage box built to 3/4 Width of cab, to height of the cab and24" deep and was fitted directly behind the cab.
The tool box had side opening doors and a central shelf.  A ladder was fitted to allow access through the roof.

The tipping body floor was constructed with Aluminium sheet , cut, folded and then welded to ensure maximum strength allowing maximum payload.
The framework for the sides and rear and ladder racks are in 2" x 2"  Aluminium box section.

The sides and rear barn doors are constructed in Aluminium plank sections.

The roof was fitted with an electric sheeting system.

Tipmaster heavy duty electro-hydraulic under floor tipping gear was used.
Paintwork and signwriting by Tipmaster.

Image
Image
Image



Tipmaster Limited build bodywork to suit your needs on any chassis.
We build on all major chassis up to 7.5 ton GVW.
All Tipmaster bodies come with a Tipmaster warranty and back up.
To find out more on what we can do for you, please call our sales Department free on
08081 44 44 77

It wouldn't be a Tipmaster without the back up
Image
 
< Prev   Next >
Image

Image

Image

Image

Image

Image

Image

Image

 
 
Tipmaster Tipmaster Tipmaster